Spaces by Jacflash How To- Wall Moulding

Applying wall moulding to your space is a great way to incorporate line and shape into your room, and brings with it a classy and sophisticated feel. We recently adding panels to a small room in a house we are working on and here’s how we did it:

df35fb7987e7e3890b926f685826814aWhat you will need:

MDF chair-rail moulding (1-2″ wide)
– nails
– mitre saw (45 degrees)
– measuring tape
– pencil
– wood filler
paintable caulking and gun
– stud/metal finder
Step 1:
Planning out your design. You need to know exactly where each panel will go and ensure that each box is visually appealing.  We first measured the wall to see the width of it and divided it by the number of panels, giving space in between each panel approximately 6″ and 2′ off the ground and 1′ down from the ceiling. You need to know how many pieces you need to cut and of what size before you begin.
unnamed
Step 2:
Measure how long each piece of chair rail needs to be with a pencil then using a 45 degree angle to cut your chair-rail (using a mitre saw helps). Cutting in opposite directions on every other piece to form a 90 degree angle.
unnamed-5
unnamed-6
Step 3:
Apply caulking on the back of each piece and carefully stick it to the wall to form your perfect rectangle panel. For extra support (we found that some of the pieces of wood were a bit curved therefore making it harder to stick to the wall) use a stud/metal finder to see where to hammer in a nail or two for extra support.
unnamed-3
unnamed-1
unnamed-2
unnamed-8
Step 4:
Fill the holes and uneven edges with wood filler and smooth with a damp finger.
unnamed-7
Step 5:
Wait at least 24 hours to dry, sand over any bumpy edges and paint over!
Enjoy your new sophisticated space.

3nvHpiNqPefD2jrCxEM52AMy4LY2NjLNgrFoeKDxz7snLDTivimVMR3W_WPKe9ST5ZqPq3-WouwUkFnJ2n-cwo fNtF4UGDZtTsY8QA1zhAA3eHfNVsX_8jeKRHtGYRDJs,Nnl9IUyPhXGeZgApVBwuLfhUBpnN-M6VxU7eqQ4ihPE